05+ Mustang

   

2005-2010 Mustang

 

2005-2010 Mustang

With the introduction of the 3-valve motor to the Mustang in 2005, a new era of small displacement Ford power was given to the V8 American Iron enthusiast. This small displacement motor has shown tremendous potential to make awesome power whether it is naturally aspirated or force inducted.


 

CRT Performance has worked with Fox Lake Power Products optimize 3-valve power packages for almost any application.

3-Valve Stage I Power Package

  • Customer's choice of camshats
  • Comp Cams cam phasers/limiters with new Ford OEM cam gear bolts
  • Comp Cams beehive springs & retainers matched to the camshaft
  • C&L 95mm Racer or JLT True Air cold air intake system
  • CMRC delete plates
  • CRT Performance custom dyno tuning

This combination will usually produce 310 to 320 RWHP at 6000 RPM on our Mustang Dyno in normally aspirated trim. Blower and turbo combinations can expect a 30-40 RWHP increase over cams.

3-Valve Stage II Power Package includes

  • Fox Lake Stage II CNC ported & assembled 3-valve heads
  • New head gaskets, exhaust gaskets and OEM TTY head bolts
  • Customer's choice of camshafts
  • Comp Cams cam phasers/limiters with new Ford OEM cam gear bolts
  • Comp Cams beehive springs & retainers matched to the camshaft
  • Stage 8 locking headers bolts
  • C&L 95mm Racer or JLT True Air cold air intake system
  • CMRC delete plates
  • FRPP 39 #/hr fuel injectors
  • CRT Performance custom dyno tuning

This combination will usually produce 350 to 360 RWHP at 6300 RPM on our Mustang Dyno in normally aspirated trim. Blower and turbo combinations can expect a 75 RWHP increase over stock heads & cams.

Optional upgrades include:

  • ARP 6- or 12-point head stud kits
  • BBK, Stainless Works or American Racing long tube headers w/ X-pipe
  • Steeda performance under-drive pulley set
  • FRPP billet ETC throttle body

Package prices vary with selected components.  Call today for package pricing to your specifications.


Fuel Pumps

2005-2009 Mustang GT Dual Fuel Pump Kit
FRDM-9407-GT05
$689.95
  • Fits 2005-2009 Mustang GT. For 2010, use M-9407-MSVTA
    Includes harness, dual fuel pumps, drop-in housing and fuel pump driver module from the 2007-09 GT500
  • Includes all installation hardware
  • Highly recommended for any application making over 400 hp
 
2010 Mustang GT Dual Fuel Pump Kit
FRDM-9407-MSVTA
$759.95
  • Includes harness, dual fuel pumps, drop-in housing and fuel pump driver module from the 2010 Mustang SVT
  • Includes allinstallation hardware
  • Highly recommended for any application making over 400 hp


Driveline & Suspension


CRT Performance offers a full line up of FRPP, Steeda, UPR and BMR suspension products for the 2005+ Mustangs.
KM011 Tubular K-member - 1/2" lowered motor mounts for supercharger clearance - OE power rack (GT or GT500) $499.95
KM010 Tubular K-member - OE power rack (not for use on GT500)  $499.95
 
RS002 BMR Tubular Radiator Support $169.95
GMS-2021-01 UPR/Granatelli Sway Bar Eliminator $79.99


Other front and rear suspension upgrades include:

  • Billet or welded construction lower control arms
  • Fixed or adjustable 3rd members
  • Adjustable panhard bars, relocation brackets and supports
  • Caster-camber plates
  • Front coil over conversion kits
  • A-arm supports
  • Strut tower braces
  • Differential cover